●The motor reducer of the machine directly couples the rollers and shaft, and drives the machine run smoothly with the help of the electrical frequency control.The speeds of the rubber conveyor belt and coating roller are indicated and adjusted on the control panel(m/min), which is visualized and convenient.
●The machine can conduct both forward coating and reverse coating, and apply for different leathers for bottom coating, impregnating, two-tone effect, surface coating, and print-up,etc, so it can meet different requirements of the finishing process. Sitll it finishes oiling and waxing processes with roller heating device.
●Three coating rollers for different purposes are equipped on the automatic pneumatic roller-changing shelf, so roller can be changed conveniently and quickly. The roller shelf can safely stop in any position in case of emergency, such as power off, air supply interruption in the process of changing rollers.
●The Blade carrier is controlled by pneumatic device, automatically advancing and retreating.The pressure between the blade and roller is adjustable. And an axial automatic reciprocating device is equipped on the blade carrier with adjustable reciprocating frequency. This remarkably enhances the pulp scraping effect.
●The working thickness(coating clearance)of the machine is controlled automatically and shows its figures in the control panel(precision 1/100mm).And with the help of manual adjusting handwheel.the depth of parallelism between coating roller and lower pressing roller can be directly and very easily controlled.
●Rubber conveyor belt driving device is installed on the driving shaft at the leather exit So the upper surface of driving shaft is flatter and straighter, and no vibration of transmitting rubber occurred
●According to different leathers, the height of the working surface of rubber conveyor belt can be automatically controlled For reverse coating, four different positions are available.It remarkably flattens the working area so as to enhance the coating quality.
●The automatic pulp supplying recycling system that is made up of stainess steel pulp-receiving device and double-diaphragm pump can guarantee the reutilization of pulp and a steady visosity of pulp in the trough, which finally ensure a high coating quality.
Technical Parameters Any changes of technical parameters and configurations shall not be informed before hand
Any changes of technical parameters and configurations shall not be informed before hand